Review & Presentations – 5th CADFEM ANSYS Simulation Conference, November 2018, Dublin

10.00 amOpening & Welcome
Derek Sweeney (CADFEM UK & Ireland Ltd, Dublin)
Download
10.15 amEngineering Analysis in the Digital Transformation Era
Richard Tinsdeall, Gair Matthews (ANSYS UK Ltd)
Not Available
10.45 amANSYS Discovery Live – Technology Update and Customer Success Story
Marc Vidal (CADFEM GmbH Germany)
Download
11:05 amComputational Fluid Dynamics at CADFEM
Summary: What’s new with CFD Premium, migration path and HPC.

Adrian Dunne (CADFEM Ireland Ltd, Dublin)
Download
11.25 am Pre-stressed Impact Analysis with Workbench LS-DYNA
Ian Turner (CADFEM UK & Ireland Ltd, London)
Download
11.45 amTake the Lead on the Autonomous Revolution
– Test and Validate with Sensor Models on Virtual Testing

Dr Josselin Petit (OPTIS Northern Europe Ltd, an ANSYS Affiliate, UK)
Download
12.05 pmSimulation for Additive Manufacturing
Christof Gebhardt (CADFEM GmbH Germany)
Download
12.25 pmDigital Twin
Christof Gebhardt (CADFEM GmbH Germany)
Download
12.45 pmNetworking Lunch
2.00 pmFEA and CFD with ANSYS in Aerogen
Finbarr Maguire, Eoin O’Donoghue (Aerogen Ltd, Galway)
Waiting for Approval
2.20 pmSmall Wind Turbine Development in ANSYS
Fiachra Ó Brádaigh (Airsynergy, Granard)
Download
2.40 pmANSYS Pointing the Way To Pressure Relief
John A. Tomasko (BS&B Innovations, Ltd, Limerick)
Waiting for Approval
3.00 pmThe Measurement and Simulation of Head Impacts – A Breakthrough in Understanding Concussion
Stephen Tiernan, Aidan Meagher (Institute of Technology Tallaght), Dr Michael Power (Beaumont Hospital and CorinthianSafety), Derek Sweeney (CADFEM and CorinthianSafety)
Download
3.20 pmCoffee Break & Networking
4.00 pmTowards the World’s Most Efficient Vehicle – Aerodynamic Simulations in Design of the Geec (Galway energy-efficient car)
Tom Dillon, Dr Rory Monaghan, Dr Nathan Quinlan (National University of Ireland, Galway)
Download
4.20 pmModelling Vehicle Suspension Systems
Gary Fitzpatrick (Timoney Technology, Navan)
Waiting for Approval
4.40 pmStructural and Ventilation Analysis of Gas Mixing Cabinets
Patrick Donnellan (Waterford Institute of Technology, South Eastern Applied Materials Research Centre)
Not Available
5:00 pmModelling a Heaving Spar Buoy in ANSYS CFX
Sean O’Callaghan (Swirl Generators Ltd, Rathvilly)
Download

sidebar.php

ANSYS, Simulation, Software, FEM, CAE